2.4Ghz DMX512 XLR Receiver for Stage + Adapter Black E6S8

Description

This receiver is used to stage light. With it, you can control stage light in way.
Features:
DMX512 receiver receives standard DMX512 protocol data (generated by console) by way.
No delay when signal data is transmitting, signal data is in real and reliable.
This product adopts a 2.4G ISM frequency section.
High effective GFSK modulate,communication design; 126 channels jumping frequency automatically, high - ability.
126 channels jumping frequency automatically, high - ability, to ensure works reliability.
7 groups code settable,User can use 7 groups individual net without any interfere each other in the same place. (Tricolor displaying Indicators)
Specifications:
2.4G DMX512 R/T
Input voltage: 5VDC 500mA MIN
Receive Sensitivity: -94dBm
Max transmitting rate: 20dBm
DMX connector: 3pin female
Communication distance: 400M (visible distance)
Work frequency section: 2.4G ISM, 126 channels.frequency section
Item color: , black (optional)
Plug standard: UK, , (optional)
Material: kirsite +
Item size: 8 * 2.5 * 2.5cm / 3.14 * 1 * 1in (L * W * H)
Cable length: 177cm / 5.8ft
Item weight: 45g / 1.59oz
Package size:14.5 * 10.5 * 4.5cm / 5.7 * 4.1 * 1.8in (L * W * H)
Package weight: 142g / 5 oz
Operating manual:
code and color corresponding relationship：
1: RED
2: GREEN
3: RED+GREEN
4: BLUE
5: RED+BLUE
6: GREEN+BLUE
7: RED+GREEN+BLUE
1) Press momentary switch above the side indicator to indicate setting.
2) Press again to set , to the color desired, adding 1 each you press the switch will advance the color IDcode.
3) Working condition:
constant lit up: No DMX or signal.
Red flash: Transmitting.
Green flash: Receiving
4) RF frequency 2.400 - 2.525G, total 126 channels, it’s searching automatically.
5) Code “1-7” groups code, press ‘’ for setting, it only can work under same code of and receiver. (Same Color)
Establishing communication:
1. on DMX512 received board first and then following to up the transmitted board.
2. Press “” button to set same value of transmitted board and received board. Please use different value if you need use more than 1 group universals at same in same place.
3. The red flashes when transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green flashes until received same value, the more DMX data, the faster the flashes.
4. Communication was established correctly.
Package list:
1 * DMX Receiver unit
1 * Adapter
1 * Specification (English)