ColorSource Relay Wired DMX

Description

ColorSource Relay Wired DMX
ColorSource Relay Wired DMX
ColorSource Relay combines power switching and data distribution in a portable plug and play format. ColorSource Relay comes in Wireless and Wired DMX input. Upon receiving data from the console, its internal sequencing routine automates the process of staggering turn-on times across relays while it provides hard-line DMX to connected fixtures.
Features:
Input Voltage: 90-250V; 47-63Hz
Portable two-pole air-gap relay
Auto sequencing: turn-on delay in each relay ensures that no two relays turn on at the same time across a system
Data input: Receives hard-wire DMX (input) for relay activation with RDM feedback and configuration while passing through DMX/RDM on the five-pin XLR (output) connector
USB master: Connect USB drive for software upgrades
Integral Safety Connection
Three mounting options: ETC LED yoke (included), universal yoke, or for use on desktop wall-mount
Applications requiring distributed dimming and position flexibility:
Schools
Houses of worship
Small theaters
Event lighting
Automated lighting systems
Industrial productions
Rentals
Conference and exhibition centers
Multi-use venues such as schools and meeting rooms
Specifications:
General:
CE Compliant; FCC approved
RoHS compliant
DMX512A compatible
RDM compatible (Wired version only)
Wireless DMX broadcasts on 2.4GHz range using Spread Spectrum Frequency Hopping (SSFH )
Mechanical:
Case manufactured of molded black textured plastic
Multiple yoke-fixing hole combinations for flexible mounting to the fixture
Convection-cooled; operates without cooling fans
Molded safety connection point
Power-input and -output connectors arranged at 45-degree angle to the pipe for ease of tie-off
Wireless model includes thumbwheel for selection of six wireless IDs or custom
Wireless model includes 2dBA gain omnidirectional antennae
Specialized directional and high-gain antennas are sold separately
Environmental:
Operating temperatures: 0-40°C; 32-104°F;
Humidity: 5-95%, non-condensing
Rated for Indoor use
Electrical:
Input power:
Max breaker sizing: 20A
Voltage ranges: 85-250V
Frequency range: 47-63Hz
Consumes .25W during sleep mode (.6W for wireless)
PowerCon compatible input and output connectors
Relay cuts both poles for support of two pole 208V and Delta applications
2500V isolation between control and power components
Wired DMX* In and Thru on five-pin XLR
DMX thru is not self-terminating
* Represents 1/4 unit device load for purpose of calculating DMX daisy-chain device count (max 32 unit devices per DMX chain)
Relay Specifications:
Switching current: 16A max at 40°C ambient
Mechanical Endurance: 1,000,000 cycles
Quiessent load: less than .65W during sleep mode
Electrical Endurance:
Resistive 100,000 cycles @16A; 250V
Inductive 100,000 cycles @6A; 277V
Motor 40,000 cycles @1.5HP; 250VAC
Ballast 20,000 cycles @1500W; 347V
Electronic 20,000 cycles @3300W @277V (12A)
Wireless DMX Specifications:
Range: 100m
Max receivers per transmitter: 32
Band: 2.4GHz Frequency Hopping Spread Spectrum
Power: up to 72mW ETSI broadcast power
Third-party compatibility: City Theatrical Show DMX
Wireless ID #6 operates outside of the Wifi bands for areas of strong wi-fi usage
Wireless DMX Latency can occur during fade chases
Control Features:
DMX512A In and Thru via five-pin XLR connectors
Supports up to 32 units on one DMX line
Choice of relay mode:
Automatic
DMX level
System Power Command