CopterX CX-3X900 Flybarless 3 Axis Gyro System for DFC Flybarless RC Helicopter

Description

EC Ship Standard Tempate
Store Categories
Store Home
Drones / Quadcopters
Racing Drones / UAVs
Filming Drones / UAVs
Entry Level Drones
Frame kit & Parts
Propellers or blades
DIY Drones
Flight Controller
Monitors / Goggles
Camera & Video Transmission
Camera Gimbal
Motors & ESCs
Radio Control
Batteries
Chargers
Antenna
RC Helicopters
Helicopter Ready to Fly
Barebone Kit
Electronic Combo
Motors & ESCs
Gyro
Servos
blades
Rotor Head
Batteries & Chargers
RC Planes
Ready to Fly Planes
Propellers or blades
RC Cars
Ready to Run
Motors & ESCs
Batteries & Chargers
Transmitter & Receiver
Servos
Batteries & Chargers
Tools and Accessories
Walkera Parts
Walkera Runner 250 / 250R
Walkera Furious 320
Walkera F210 / F210 3D
Walkera Rodeo 150
Walkera Rodeo 110 Parts
Walkera Furious 215
Walkera Genius CP
Walkera Super CP
Walkera Mini CP
CopterX Parts
CopterX 250 Parts
CopterX 450 Parts
CopterX 450 BA Parts
CopterX 450 PRO Parts
CopterX 500 Parts
CopterX 600 Parts
DJI Parts
DJI Spark
DJI Mavic
DJI OSMO
DJI Phantom 4
DJI Phantom 3
DJI Phantom 2
DJI Inspire 1
Others
Hubsan Parts
Handheld Gimbal / Camera
Other
NEWSLETTER
Subscribe our newsletter. You will receive our newsletter once a week.
SUBSCRIBE
CopterX CX-3X900 Flybarless 3 Axis Gyro System for DFC Flybarless RC Helicopter
eBay Special Price .99
CopterX (CX-3X900) Flybarless 3 Axis Gyro System
CX-3X900 Features:
High quality MEMS sensors on three axes
Digital signal processor with extremely high arithmetic performance
Axis-corrected sensor system prevents influences of individual functions
Integrated digital Cyclic Ring function
Accurate localization and excellent ability to prevent crosswind
Integrated mechanical, 90°, 120°, 135° and 140° swashplate mixer
Dynamic swashplate turn for optimal position stability while pirouetting the helicopter
Suitable for two and multi-blade rotor heads
Swashplate servo and rudder servo works fine with all common digital servo and analog servo
Digital servo with 1520uS and 760uS
You can update your configurations by the FBL Programmer. cause CX-3X900 setup very easy
CX-3X900 Specification:
MEMS Gyro Sensors in three Axes
Digital signal processor
Operating voltage: 4-10 Volts, current
Temperature range: -10°C to +50°C
Weight: 15g
Servo compatibility: 1520uS and 760uS digital servos, Analog servo
Spare parts: foam and double-side adhesive tape and Stainless steel plate and terminated line
Dimensions: 33*34*18mm
CX-3X900 Suggestion of CX-3X900 setup procedures:
When installing CX-3X900 on your heli for the first time, the rudder stick must be pushed to the left end or right end within 3 seconds after power on. Then CX-3X900 enters into initial setup mode
Check whether the direction of swash plate servos(AILERON, ELEVATOR, PITCH servos)correct or not. If not correct, you can adjust direction of AILERON or ELEVATOR or PITCH servo in TX REVERSE menu, until the direction of swash plate servos is correct
The swash plate of heli is at the neutral point. You must calibrate the neutral point of TX aileron/elevator/pitch servos through TX CALIBRATION/SWPL TRIM CALIBR in program box. So that the heli can fly more stabilized and have better anti-wind capacity. CX-3X900 can analyze swash plate mix signal from TX correctly
Note: If you alter AILERON/ELEVATOR/PITCH sub trim in TX, you must calibrate the neutral point of swash plate through TX CALIBRATION/SWPL TRIM CALIBR in program box. Otherwise, heli will fly unstably and have weak anti-wind capacity
The swash plate of heli is at low level; calibrate the lowest point of TX aileron/elevator/pitch servos through TX CALIBRATION/SWPL LOW CALIBR in the program box. In this way, aileron/elevator/pitch servos can be synchronized
The swash plate of heli is at highest level; calibrate the highest point of TX aileron/elevator/pitch servos through TX CALIBRATION/SWPL HIGH CALIBR in the program box. In this way, aileron/elevator/pitch servos can be synchronized
If heli wobbling around and having weak wind capacity in flight, you can increase aileron gain. If heli vibrating, you can reduce aileron gain
If the heli raising head in flight, you can increase elevator gain; If heli lowering head in flight, you can reduce elevator gain
TX gain setup.
Sensitivity pulse width
Flight mode
Gain 1940us
0
1640us
1
1740us
2
1840us
3
When GN-MODE in the program box being at the current menu, alter TX gain, press function key F+and F- to refresh gain pulse instead of real time refreshing gain pulse. Gain pulse can also be refreshed at the time of changing flight mode
MPN
:
Does Not Apply
Brand
:
CopterX
Type
:
Gyro
Compatible Vehicle Type
:
Helicopters
Model
:
CX-3X900
Country/Region of Manufacture
:
China
Payment
We only Accept Paypal as payment method and Ship to Paypal delivery address.
Please make sure your paypal delivery address is correct before complete the payment.
Please note that paying by eCheck via PayPal can delay your shipment by up to two weeks while payment clears through the PayPal system (Check with PayPal on the expected clearance date).Once your eCheck payment clears, your item will be dispatched to you within 1 working day.
Shipping
Item will be shipped within 1-3 business day after confirmed payment.
Please verify your address during checkout. We are not responsible for any wrong or undeliverable addresses
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs before making you purchase.
We only ship to Paypal Delivery Address. Please make sure your paypal delivery address is correct.
Return
Return Address:
If the item is shipped from Germany Warehouse, then buyer need to return to Germany (30165 Hannover ) warehouse.
If the item is shipped from United Kingdom (M50 2UE Greater Manchester) Warehouse, then buyer need to return to United Kingdom warehouse.
If the item is shipped from United States (NJ 08810) Warehouse, then buyer need to return to United States warehouse.
If the item is shipped from China Warehouse, then buyer need to return to China warehouse.
Item Defective On Arrival:
If the item arrived broken, you need to contact us within 14 days from the day you received the package. We may ask you to send back the defective item. When you return the item, it should come with all included accessories such as the cable, charger and battery. If an item is missing we will ask you to pay for them. We will be in-charge of all of the return shipping fees.
Dislike Items or order by mistake:
If you dislike the item for any reason, you can contact us within 14 days after delivery. You need to offer photos or videos to show us the item is in the same condition as when it was delivered to you, without any other damage or defective parts. Once we have confirmed the condition, the item should be returned to us. You need to pay the full cost of shipping the item back to us. We will refund the price to you after we have received the item, checked the condition and make sure the original accessories are included (all items must be without any damages or scratches).
Broken within 14 days:
Artificial factors such as dis-assembly, misuse, drops, crashes or falls, water damage, unofficial firmware or software modifications or any others causes or damage are NOT covered.
After 14 days:
You may need to contact manufacturer for support. We will not provide any refund, resend or repair service. We will only provide advisory services to help you solve the problem.
besthobbysite01
CopterX CX-3X900 Flybarless 3 Axis Gyro System for DFC Flybarless RC Helicopter
ITEM
SPECIFICS
MPN
Does Not Apply
Brand
CopterX
Type
Gyro
Compatible Vehicle Type
Helicopters
Model
CX-3X900
Country/Region of Manufacture
China
ITEM
DESCRIPTION
CopterX (CX-3X900) Flybarless 3 Axis Gyro System
CX-3X900 Features:
High quality MEMS sensors on three axes
Digital signal processor with extremely high arithmetic performance
Axis-corrected sensor system prevents influences of individual functions
Integrated digital Cyclic Ring function
Accurate localization and excellent ability to prevent crosswind
Integrated mechanical, 90°, 120°, 135° and 140° swashplate mixer
Dynamic swashplate turn for optimal position stability while pirouetting the helicopter
Suitable for two and multi-blade rotor heads
Swashplate servo and rudder servo works fine with all common digital servo and analog servo
Digital servo with 1520uS and 760uS
You can update your configurations by the FBL Programmer. cause CX-3X900 setup very easy
CX-3X900 Specification:
MEMS Gyro Sensors in three Axes
Digital signal processor
Operating voltage: 4-10 Volts, current
Temperature range: -10°C to +50°C
Weight: 15g
Servo compatibility: 1520uS and 760uS digital servos, Analog servo
Spare parts: foam and double-side adhesive tape and Stainless steel plate and terminated line
Dimensions: 33*34*18mm
CX-3X900 Suggestion of CX-3X900 setup procedures:
When installing CX-3X900 on your heli for the first time, the rudder stick must be pushed to the left end or right end within 3 seconds after power on. Then CX-3X900 enters into initial setup mode
Check whether the direction of swash plate servos(AILERON, ELEVATOR, PITCH servos)correct or not. If not correct, you can adjust direction of AILERON or ELEVATOR or PITCH servo in TX REVERSE menu, until the direction of swash plate servos is correct
The swash plate of heli is at the neutral point. You must calibrate the neutral point of TX aileron/elevator/pitch servos through TX CALIBRATION/SWPL TRIM CALIBR in program box. So that the heli can fly more stabilized and have better anti-wind capacity. CX-3X900 can analyze swash plate mix signal from TX correctly
Note: If you alter AILERON/ELEVATOR/PITCH sub trim in TX, you must calibrate the neutral point of swash plate through TX CALIBRATION/SWPL TRIM CALIBR in program box. Otherwise, heli will fly unstably and have weak anti-wind capacity
The swash plate of heli is at low level; calibrate the lowest point of TX aileron/elevator/pitch servos through TX CALIBRATION/SWPL LOW CALIBR in the program box. In this way, aileron/elevator/pitch servos can be synchronized
The swash plate of heli is at highest level; calibrate the highest point of TX aileron/elevator/pitch servos through TX CALIBRATION/SWPL HIGH CALIBR in the program box. In this way, aileron/elevator/pitch servos can be synchronized
If heli wobbling around and having weak wind capacity in flight, you can increase aileron gain. If heli vibrating, you can reduce aileron gain
If the heli raising head in flight, you can increase elevator gain; If heli lowering head in flight, you can reduce elevator gain
TX gain setup.
Sensitivity pulse width
Flight mode
Gain 1940us
0
1640us
1
1740us
2
1840us
3
When GN-MODE in the program box being at the current menu, alter TX gain, press function key F+and F- to refresh gain pulse instead of real time refreshing gain pulse. Gain pulse can also be refreshed at the time of changing flight mode
PAYMENT
We only Accept Paypal as payment method and Ship to Paypal delivery address.
Please make sure your paypal delivery address is correct before complete the payment.
Please note that paying by eCheck via PayPal can delay your shipment by up to two weeks while payment clears through the PayPal system (Check with PayPal on the expected clearance date).Once your eCheck payment clears, your item will be dispatched to you within 1 working day.
SHIPPING
Item will be shipped within 1-3 business day after confirmed payment.
Please verify your address during checkout. We are not responsible for any wrong or undeliverable addresses
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs before making you purchase.
We only ship to Paypal Delivery Address. Please make sure your paypal delivery address is correct.
RETURN
Return Address:
If the item is shipped from Germany Warehouse, then buyer need to return to Germany (30165 Hannover ) warehouse.
If the item is shipped from United Kingdom (M50 2UE Greater Manchester) Warehouse, then buyer need to return to United Kingdom warehouse.
If the item is shipped from United States (NJ 08810) Warehouse, then buyer need to return to United States warehouse.
If the item is shipped from China Warehouse, then buyer need to return to China warehouse.
Item Defective On Arrival:
If the item arrived broken, you need to contact us within 14 days from the day you received the package. We may ask you to send back the defective item. When you return the item, it should come with all included accessories such as the cable, charger and battery. If an item is missing we will ask you to pay for them. We will be in-charge of all of the return shipping fees.
Dislike Items or order by mistake:
If you dislike the item for any reason, you can contact us within 14 days after delivery. You need to offer photos or videos to show us the item is in the same condition as when it was delivered to you, without any other damage or defective parts. Once we have confirmed the condition, the item should be returned to us. You need to pay the full cost of shipping the item back to us. We will refund the price to you after we have received the item, checked the condition and make sure the original accessories are included (all items must be without any damages or scratches).
Broken within 14 days:
Artificial factors such as dis-assembly, misuse, drops, crashes or falls, water damage, unofficial firmware or software modifications or any others causes or damage are NOT covered.
After 14 days:
You may need to contact manufacturer for support. We will not provide any refund, resend or repair service. We will only provide advisory services to help you solve the problem.