-40%

CUAV V5+ Flight Controller+NEO V2 GNSS Module 25CM Cable for RC Drone Quadcopter

$ 214.06

Availability: 76 in stock
  • Model: CUAV V5+
  • Type: Flight Controller
  • Brand: Unbranded
  • Condition: New

    Description

    Description
    CUAV V5+ Flight Controller & NEO V2 GNSS Module (25CM Cable) for FVP Drone Quadcopter Helicopter
    Description:
    V5+ is an advanced flight controller manufactured by CUAV. The board is based on the Pixhawk FMUv5 design standard, the external interface uses the Pixhawk standard pinouts, and the modular design allows the users to customize their own carrier board. It is compatible with both PX4 and firmware for ArduPilot. V5+ is ideal for academic research and commercial systems integration.
    Flight Controller Specifications:
    Hardware parameter:
    - Main processor: STM32F765 (32Bit for Arm Cortex-M7, 216MHz, 2MB flash, 512KB RAM)
    - Coprocessor: STM32F100 (32Bit for Arm Cortex-M3, 24MHz, 8KB SRAM)
    Sensor:
    - Accelerometer: ICM-20602/ICM-20689/BMI055
    - Gyro: ICM-20602/ICM-20689/BMI055
    - Compass: IST8310
    - Barometer: MS5611
    Interface:
    - UART: 5
    - I2C: 4
    - SPI: 1
    - CAN: 2
    - ADC: 2
    - PWM out: 14
    - PWM in: 6
    - PPM in: 1
    - DSM/SBUS/RSSI: 1
    - Power1: 1
    - Power1: 1
    - Safety switch: 1
    - Buzzer: 1
    - USB-TYPE-C: 1
    - TF slot: 1
    Function:
    - Firmware: for PX4/Ardupilot
    - Model: Copter/Plane/Helicopter/VTOL/unmanned vehicle/Rover, etc.
    - Power: Three-way power input redundancy
    Size and Weight:
    - Size: 85.5 x 42 x 33mm/3.4 x 1.7 x 1.3"
    - Weight: 91g/0.2lb
    NEO V2 GNSS Module:
    Chip Type:
    - GPS Location: for U-BLOX M8N
    - RGB Status light: NCP5623C
    - Compass: IST8310
    - Buzzer: Passive buzzer
    - Safety switch: Physical buttons
    Positioning Performance:
    - Accuracy: 3DFix
    - Update rate: 10Hz (Max)
    - Acquisition: Cold Start 26S; Host Start 1.5S; Aided Start 2S; Re-acquisition 1S
    Other Parameters:
    - Receiver type: 72 Channels. GPS/QZSS L1 C/A, GLONASS L10F BeiDou B1l, Galileo E1B/C SBAS L1C/A: WAAS, EGNOS, MSAS, and GAGAN
    - Sensitivity: Tracking & Navigation: -167dBm; Cold Start: -148dBm; Hot Start-156dBm; Reacquisition-160dBm
    - Functional: Advanced jamming. Fast search satellite speed. Security and integrity protection. Receiving up to three GNSS at the same time
    Working Conditions:
    - Input voltage: 5V
    - Temperature: -10 to 70℃
    Package Included:
    - 1 x Flight Controller V5+
    - 1 x I2C/CAN Cable
    - 1 x ADC3.3 Cable
    - 1 x RSSI Cable
    - 1 x SUBS Cable
    - 1 x HV PM Power Module
    - 1 x Dupont Cable
    - 1 x Pw-Link Module
    - 1 x USB-Type C Cable
    - 1 x 16G Memory Card
    - 1 x DSM Cable
    - 1 x CAN Extension Board
    - 1 x NEO V2 Module
    - 1 x Bracket for NEO V2 Module
    Payment Terms
    1.We accept PayPal only.
    2.All major credit cards are accepted through secure payment processor PayPal.
    3.Payment must be received within 7 business days of auction closing.
    4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
    Shipping Terms
    - For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
    Return Terms
    1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
    2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
    3. We reserve the right to refuse any returns for objective reasons.
    Custom Duties & Taxes
    1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
    2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
    Feedback
    1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
    On Jul 31, 2022 at 21:06:13 PDT, seller added the following information: