Diatone Mamba F722 APP Wifi F60PRO 3-6S 32bit Flight Controller Stack

Description

Diatone Mamba F722 APP Wifi F60PRO 3-6S 32bit Flight Controller Stack
MAMBA F722S APP I2C WIFI F60PRO 3-6S Flight Controller Stack Firmware Target /Config： Mamba F722 I2C Diagram Link From Help Centre Link Note：Since STM32F722 heat large ， please leave at least 5mm interspace at both sides of the FC with nothing covered to make sure a good air circulation. Update Details:BT to WiFiUSB power supply can use receiver, OSDAdd a group of I2C pads (SCL SDA)Add inverter Dual-Way TX serial portAdd 2812 LED switch function, key can turn off ledAdd 4 corner LED interface to support BF led and Mamba ledUpgrade to stronger type-C, optimize pad position FC SpecificationsMCU: 216MHz STM32F722RET6 32BITIMU: MPU6000Barometer: NoOSD: BF OSDBlacbox: 16M Flash MemoryUarts: 6SetESC Soft: Dshot300/600/1200ESC Telemetry: RX6LED indicator: Blue&Orange for FC Status,Green 9V,White 5V,Red 3.3VLED Controller:BF LED/MB LED（ 4 Set 2812 LED）WIFI: SpeedyBee APP Smartaudio: YesBuzz: YesInput: 3~6S Lipo (12.6~25V)TVS Protection: Yes BEC: 5V 2.5A & 9V 2A (Max 3A)MOUNTING: 30.5mm/M3 WEIGHT: 9gSupply : 8pin sh1.0 *1 Smartaudio: YesBuzz: YesInput: 3~6S Lipo (12.6~25V)VTS Protection: Yes ESC Specifications F60PRO INPUT VOLTAGE: 3~6S Lipo (12.6V~25V) CONTINUE CURRENT: 75A×4 BURST CURRENT: 60A (10S) BEC: NO ESC Dshot300/600/1200 MOUNTING: 30.5mm/M3 Supply : Panasonic High Frequency 470uF/35V Mounting: 30.5×30.5mm,Φ3Dimensions: Weight: 22gIncluding1×MAMBA F722 APP F60PRO STACK About SpeedyBee Function： For WIFI For BlueTooth
Diatone Mamba F722 APP Wifi F60PRO 3-6S 32bit Flight Controller Stack
MAMBA F722S APP  I2C WIFI  F60PRO 3-6S Flight Controller Stack
Firmware Target /Config
：
Mamba F722 I2C
Diagram Link From Help Centre Link
Note：Since STM32F722 heat large ， please leave at least 5mm interspace at both sides of the FC with nothing covered to make sure a good air circulation.
Update Details:
BT to WiFi
USB power supply can use receiver, OSD
Add a group of I2C pads (SCL SDA)
Add inverter Dual-Way TX serial port
Add 2812 LED switch function, key can turn off led
Add 4 corner LED interface to support BF led and Mamba led
Upgrade to stronger type-C, optimize pad position
FC Specifications
MCU: 216MHz STM32F722RET6 32BIT
IMU: MPU6000
Barometer: No
OSD: BF OSD
Blacbox: 16M Flash Memory
Uarts: 6Set
ESC Soft: Dshot300/600/1200
ESC Telemetry: RX6
LED indicator: Blue&Orange for FC Status,Green 9V,White 5V,Red 3.3V
LED Controller:BF LED/MB LED（ 4 Set 2812 LED）
WIFI: SpeedyBee APP
Smartaudio: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25V)
TVS Protection: Yes
BEC: 5V 2.5A & 9V 2A (Max 3A)
MOUNTING: 30.5mm/M3 WEIGHT: 9g
Supply :
8pin sh1.0 *1
Smartaudio: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25V)
VTS Protection: Yes
ESC Specifications
F60PRO
INPUT VOLTAGE: 3~6S Lipo (12.6V~25V)
CONTINUE CURRENT: 75A×4
BURST CURRENT: 60A (10S)
BEC: NO
ESC Dshot300/600/1200
MOUNTING: 30.5mm/M3
Supply : Panasonic High Frequency 470uF/35V
Mounting: 30.5×30.5mm,Φ3
Dimensions:
Weight: 22g
Including
1×
MAMBA F722 APP   F60PRO  STACK
About SpeedyBee Function：
For  WIFI
For  Blue
Tooth
×
×
×
×
×
×
Buy now and save!
Tell a friend
Visit store
Watch now
Postage info
Click the Postage tab above the listing description for more info
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
You might also like
Align Torque Tube - Trex 500E Pro / 500 ESP / 500 EFL / 500 Pro DFC / 500L Domin
Carbon fiber Tail Blade 68mm (Green)
Carbon fiber Zeal Tail Blade 62mm (Green)
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© HeliDirect
Postage
Click the Postage tab above the listing description for more info
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
Additional Information:
HeliDirect offers a (14) day return policy for all new, unuséd items that are in brand new condition without fault, damage or otherwise. Items being returned must be brand new without any use. Any kits that have been partially or fully built, items that have been soldered, batteries that have been soldered or charged, or products that have been cut, punctured, modified or otherwise, will not be accepted as a return. Aircraft that have been “test flown” will not be accepted as a return item. - Valid returns are based upon factory sealed products that are in 100% resale condition. We will charge 20% restocking fee for this case. Shipping fee wont be refunded. - If the item(s) received has been opened, uséd or damaged, no return options will be offered. Outside of warranty, any item without fault or warranty related issue cannot be accepted back unless the item is in brand new condition, as we cannot offer an opened or uséd item to our customer base. - If a non warranty item is being returned based upon valid return guidelines (brand new, unuséd, factory sealed packaging), the original shipping fees paid by HeliDirect (if Free Shipping was uséd) will be deducted from the overall sum total. If the customer paid for a specified shipping method, these shipping fees will not be valid for a refund. ***Returning Fragile Items - In regards to returning fragile items that can be easily damaged, it is the customer’s sole responsibility to ensure that the package is packed and sealed safely, as any damage via return shipping will not be accepted. If a damaged item is received, it will be returned to the original shipping address, and will need to be settled via the customer through the shipping agent uséd. HeliDirect will not be involved in any claims, refunds, credits or otherwise for return shipping damage. *** Warranty Returns - Faulty / Damaged Item(s) Received - For any item that is faulty, damaged, or falls relating to warranty related issues, please contact our customer service department for help, and we will be sure to assist you in every way possible in regards to the matter at hand. - Please note that certain / select products we carry may be replaced or repaired direct via the manufacture, no matter when the item / product was purchased. In this case, feel free to contact us for help, and we will issue you the proper contact information so the item can be addressed via the manufacturer. However, we will be certain your warranty is properly addressed. - For valid returns, once an RMA number is received, please ship back to us via standard shipping – no upgraded shipping method, such as 2nd Day Air, Overnight, or EMS will be credited or refunded. Returns can take several days to be processed. - For DJI brand, please contact directly DJI service center. ***Return Processing Requiring Product Testing - For any item requiring testing,as the testing process via our in house technicians will require the necessary time to problem solve your return. Our goal is to isolate whatever trouble your item(s) may be experiencing, and as soon as we have the available information to proceed, you will be updated regarding this. RMA Number Information All approved return items will require an RMA number before being shipped back to our location. This number aids us in the ability to properly handle your return. Without an RMA number, your package has a probability of being mis-handled, lost or delayed, and HeliDirect will take no responsibility for any return that does not have an approved RMA number. Please contact our staff for proper RMA information, as we are happy to help you. ***Note; For all return products without contact us before. It means you violate our return policy.
eBay integration
by