ENTTEC BLACK *BLACK - ALEPH2 ET DX4 LED BAR 41DEG 600MM INDOOR

Description

Features
·
Strong aluminium chassis with small profile
·
DMX512 Controllable and RDM Configurable
·
Can use up to 8 DMX channels, depending on configuration
·
Snapshots: 64 fully user recordable slots, 25 different pre-loaded stand-alone colours
·
16-bit or Smart 8-bit LED dimming
·
Strobe Mode with controllable frequency from DMX
·
Fan-less smart heat management
·
Easy addressing and configuration interface
·
180° Ajustable
mounting bracket
·
Changeable diffuser using holder accessory (sold separately)
Cleaning
It is important to clean the ALEPH2 ET DX4 to maintain a long service life. Make sure the unit is unplugged before you attempt any cleaning.
·
Surface dust should be removed with an air compressor, please make sure you do not blow compressed air directly inside the unit.
·
Optics can be cleaned with a glass cleaner or IPA with a soft cloth
·
Make sure the unit is dry and there is no cleaning fluid residue before powering the unit after cleaning.
Main Menu
Level 1
Level 2
Setup
DMX Address
Values: 001 to 512
Personality
1 – 8bit RGBW Mode
2 – 8bit RGB Mode
3 – 16bit 8ch Mode
4 – 16bit 6ch Mode
5 – Extended 7ch Mode
Pre-sets
Values: 01 to 64
Lamp On Mode
OFF
DMX
ON
PWM Frequency
Values:
500, 1500 or 2000
Back-light
NORMAL
ON
OFF
Factory Defaults
YES
NO
Temperature
LED TEMP
CPU TEMP
Test
LED 1
LED 2
LED 3
LED 4
ALL LEDs
Item
300mm
600mm
Input Voltage
110 – 240V AC
Input Frequency
50/60Hz
Maximum Power Consumption
55 Watts
110 Watts
Light Output (all on)
1460 lm
2920 lm
Minimum turn on level(DMX=1)
Red:0.1lm
Red:0.2lm
Green:0.9lm
Green:1.8lm
Blue:0.36lm
Blue:0.72lm
White:1.7lm
White:3.4lm
CRI
80
CREE XM-L Color Leds Quantity
6
12
Colours
Red, Green, Blue, Neutral White
Diffuser
Additional diffusers sold separately
Beam Angle
40°
Control Input
DMX512 & RDM E1.20
Weight (Kg)
3.7
4.9
Weight (Pounds)
8.2
10.8
Cooling Method
Convection
Ambient Temperature
5° to 50° C
Surface Operating
67°C at steady state
Temperature
(full intensity output and Ta=45°C)
Maximum Surface
70°C
Temperature
Error mode (10% output)enables if T>70°C recovers after 5°C drop
Ingress Protection Rating
IP20
Connectors
1x 5-Pin Male XLR for DMX input
1x 5-Pin Female XLR for DMX output
1x IEC C13/C14 IN/OUT Socket for mains
Safety
·
Do not expose the ALEPH2 ET DX4 to rain or moisture, doing this will void your warranty.
·
Do not spill water or other liquids into or onto your unit.
·
Do not look directly into the LEDs, doing so may damage your eyes.
·
Check that the local power outlet matches the required voltage (120
→
240V AC)
·
Make all the connections before you plug in the main power.
·
Do not remove the cover under any condition. There are no user serviceable parts inside.
·
Never operate this unit when its cover is removed.
·
Never plug this unit in to a dimmer rack.
·
Always be sure to mount this unit in an area that will allow proper ventilation. Allow at least 20 cm between this device and a wall.
·
Make sure ventilation holes are clean and unobstructed.
·
Do not attempt to operate this unit, if it becomes damaged.
·
Always mount this unit in a safe and stable manner.
·
Power-supply cords should be routed carefully.
·
The unit should be situated away from heat sources
Open Box Disclaimer
Open Box merchandise are products that have been purchased and delivered to other customers, and then returned to ENTTEC Americas. All items are tested and verified to ensure complete functionality. The product and packaging may exhibit cosmetic imperfections as a result of its having been previously opened, however these imperfections will not affect performance. These products are sold below standard list price.
Returns
All Open Box merchandise is non-refundable.
Warranty
All Open Box merchandise has a 30-day manufacturer’s warranty, unless otherwise specified in the item description. During this time ENTTEC Americas will replace any defective products with another open box item of equal value and quality. If this is not possible, ENTTEC Americas will offer a full refund upon receipt of the defective item.