FETtec Spike Absorber for FPV Quad mini Drone Race Free Style DIY Hobby NEW 1pc

Description

100% Original
Fair Pricing
Fast Shipping
BUY NOW!
FETtec Spike Absorber for FPV Quad mini Drone Race Free Style DIY Hobby NEW 1pc
FETtec Spike Absorber
Well-selected TVS diodes to absorb dangerous voltage spikes to protect connected components
Designed for use with an electrolytic capacitor, which can be mounted directly on it
Maximum operating Voltage 25,2V (6S LiPo)
1.62g weight
The Spike Absorber absorbs voltage spikes so that damaging voltages are not reached at all
Description:
The FETtec Spike Absorber uses well choosen TVS-Diodes to prevent the connected components from huge voltage spikes. The Spike Absorber is meant to be used in addition to a electrolyt capacitor. The capacitor can be mounted directly on top of it.
It will take care that the voltage dont rises above a specific level. Which means it absorbs energy once the specific voltage level is reached.
On electrical power systems using brushless motors, ESCs and LiPo batterys, high current and voltage peaks are common. The most known way to keep them in areas where they dont damage consumers that are connected to the battery is the usage of capaitors, which is in fact a good way. Capacitors dumpen any movement of the voltage. They store energy if the voltage rises and supply it when the voltage falls. But in some cases there are very short but high voltage spikes where capacitors are too slow. These spikes are mostly very short and appear in the area of some nano – microseconds, but can be easily the double or triple of the normal battery voltage. The most consumers survive a lot of them eaven if they are over their normal voltage rating. But if the spike is too strong, or it happens over a longer period, voltage regulators, capacitors and FETs can be damaged and fail. The Spike Absorber will absorb the energy of these spikes before they get in areas where consumers might get damage.
Payment
Shipping
Returns
Secure & Easy Ordering. Orders can be placed online using PayPal to ensure a safe and secure transaction and guarantee you privacy. The address in Paypal is the address your order will be shipped to. We are only able to dispatch goods once payment has cleared. All refunds are issued via PayPal only.
Fast worldwide shipping with tracking number. We reserve the right not to ship to any unconfirmed PayPal addresses. Shipments usually takes 5-15 working days to your PayPal registered address.
ITALY, ISRAEL, SPAIN, GERMANY, EASTERN EUROPE, SOUTH AMERICA, AFRICA AND MIDDLE EAST may take from 10-25 days due the slow postal services and strict custom clearances.
After receiving the item, contact us within : 30 Days
Refund will be given as : Money back or item exchange (buyer's choice)
Return shipping : Buyer pays return shipping
100% Original
Fair Pricing
Fast Shipping
FETtec Spike Absorber Well-selected TVS diodes to absorb dangerous voltage spikes to protect connected components Designed for use with an electrolytic capacitor, which can be mounted directly on it Maximum operating Voltage 25,2V (6S LiPo) 1.62g weight ![image] (https://cdn.shopify.com/s/files/1/0948/3076/files/Abmessung-Spike-Absorber.png?v=1576817311) The Spike Absorber absorbs voltage spikes so that damaging voltages are not reached at all ![image] (https://cdn.shopify.com/s/files/1/0948/3076/files/Schaubild.png?v=1576817334) Description: The FETtec Spike Absorber uses well choosen TVS-Diodes to prevent the connected components from huge voltage spikes. The Spike Absorber is meant to be used in addition to a electrolyt capacitor. The capacitor can be mounted directly on top of it. It will take care that the voltage dont rises above a specific level. Which means it absorbs energy once the specific voltage level is reached. On electrical power systems using brushless motors, ESCs and LiPo batterys, high current and voltage peaks are common. The most known way to keep them in areas where they dont damage consumers that are connected to the battery is the usage of capaitors, which is in fact a good way. Capacitors dumpen any movement of the voltage. They store energy if the voltage rises and supply it when the voltage falls. But in some cases there are very short but high voltage spikes where capacitors are too slow. These spikes are mostly very short and appear in the area of some nano – microseconds, but can be easily the double or triple of the normal battery voltage. The most consumers survive a lot of them eaven if they are over their normal voltage rating. But if the spike is too strong, or it happens over a longer period, voltage regulators, capacitors and FETs can be damaged and fail. The Spike Absorber will absorb the energy of these spikes before they get in areas where consumers might get damage.
100% Original
BUY NOW!
FETtec Spike Absorber for FPV Quad mini Drone Race Free Style DIY Hobby NEW 1pc
FETtec Spike Absorber
Well-selected TVS diodes to absorb dangerous voltage spikes to protect connected components
Designed for use with an electrolytic capacitor, which can be mounted directly on it
Maximum operating Voltage 25,2V (6S LiPo)
1.62g weight
The Spike Absorber absorbs voltage spikes so that damaging voltages are not reached at all
Description:
The FETtec Spike Absorber uses well choosen TVS-Diodes to prevent the connected components from huge voltage spikes. The Spike Absorber is meant to be used in addition to a electrolyt capacitor. The capacitor can be mounted directly on top of it.
It will take care that the voltage dont rises above a specific level. Which means it absorbs energy once the specific voltage level is reached.
On electrical power systems using brushless motors, ESCs and LiPo batterys, high current and voltage peaks are common. The most known way to keep them in areas where they dont damage consumers that are connected to the battery is the usage of capaitors, which is in fact a good way. Capacitors dumpen any movement of the voltage. They store energy if the voltage rises and supply it when the voltage falls. But in some cases there are very short but high voltage spikes where capacitors are too slow. These spikes are mostly very short and appear in the area of some nano – microseconds, but can be easily the double or triple of the normal battery voltage. The most consumers survive a lot of them eaven if they are over their normal voltage rating. But if the spike is too strong, or it happens over a longer period, voltage regulators, capacitors and FETs can be damaged and fail. The Spike Absorber will absorb the energy of these spikes before they get in areas where consumers might get damage.
Payment
Secure & Easy Ordering. Orders can be placed online using PayPal to ensure a safe and secure transaction and guarantee you privacy. The address in Paypal is the address your order will be shipped to. We are only able to dispatch goods once payment has cleared. All refunds are issued via PayPal only.
Shipping
Fast worldwide shipping with tracking number. We reserve the right not to ship to any unconfirmed PayPal addresses. Shipments usually takes 5-15 working days to your PayPal registered address.
ITALY, ISRAEL, SPAIN, GERMANY, EASTERN EUROPE, SOUTH AMERICA, AFRICA AND MIDDLE EAST may take from 10-25 days due the slow postal services and strict custom clearances.
Returns
After receiving the item, contact us within : 30 Days
Refund will be given as : Money back or item exchange (buyer's choice)
Return shipping : Buyer pays return shipping
100% Original
Fast Shipping
Fair Pricing
FETtec Spike Absorber
Well-selected TVS diodes to absorb dangerous voltage spikes to protect connected components
Designed for use with an electrolytic capacitor, which can be mounted directly on it
Maximum operating Voltage 25,2V (6S LiPo)
1.62g weight
The Spike Absorber absorbs voltage spikes so that damaging voltages are not reached at all
Description:
The FETtec Spike Absorber uses well choosen TVS-Diodes to prevent the connected components from huge voltage spikes. The Spike Absorber is meant to be used in addition to a electrolyt capacitor. The capacitor can be mounted directly on top of it.
It will take care that the voltage dont rises above a specific level. Which means it absorbs energy once the specific voltage level is reached.
On electrical power systems using brushless motors, ESCs and LiPo batterys, high current and voltage peaks are common. The most known way to keep them in areas where they dont damage consumers that are connected to the battery is the usage of capaitors, which is in fact a good way. Capacitors dumpen any movement of the voltage. They store energy if the voltage rises and supply it when the voltage falls. But in some cases there are very short but high voltage spikes where capacitors are too slow. These spikes are mostly very short and appear in the area of some nano – microseconds, but can be easily the double or triple of the normal battery voltage. The most consumers survive a lot of them eaven if they are over their normal voltage rating. But if the spike is too strong, or it happens over a longer period, voltage regulators, capacitors and FETs can be damaged and fail. The Spike Absorber will absorb the energy of these spikes before they get in areas where consumers might get damage.