-40%

Hex Blue Cube Flight Controller

$ 59.66

Availability: 100 in stock
  • All returns accepted: ReturnsNotAccepted
  • Type: Flight Controller
  • Condition: Used

    Description

    Hex Blue Cube Flight Controller.
    Blue Cube-Made in U.S.
    INSIDE THE CUBE An STM32F427 Rev 3 Flight management unit. (where the flight controller lives.)
    An STM32F100 I/O processor with pass through capabilities for failsafe. (deals with the Receiver and outputs )
    3 IMU's
    1 Fixed 10 Axis IMU on the main Main board. (MPU9250 3 axis Accell, 3 axis gyro, and 3 axis mag, MS5611 Barometer)
    2 Vibration Isolated and heat controlled 9DOF IMU's and an isolated Baro. (MPU9250 3 axis Accell, 3 axis gyro, and 3 axis mag, LSM303D 3 axis Accelerometer, 3Axis Magnatometer, L3GD20 3 Axis GyroMS5611 Barometer
    In case you missed it.... 3 IMU's STANDARD.
    all connections are via an 80 pin DF17 connector on the base. the following connections are included.
    2x CAN (pins reserved for a 3rd Can bus on next years model)
    2x I2C
    5x Serial (1 reserved for debug)
    2x SWD debug ports
    2x Power input V+I
    1x Analogue input (one of the power inputs can be used as Analogue if you need)
    Buzzer raw pwm
    Safety switch
    8 x I/O connected PWM out (Solder option for 3.3 or 5v levels, default 3.3)(opto drive capable 10mA each)
    6 x Aux FMU connected I/O (PWM or alternate function)
    Servo rail I/O backup power (10.5v Max)
    2x 5.4v power in pins. All other pins are reserved DNC.