HobbyWing XRotor Flight Controller F4 G3 w/OSD

Description

HobbyWing XRotor Flight Controller F4 G3 w/OSD
Generation 3Flight Controller that works, period Redesign every aspectSTM32 F405 MCU allows the FC to run the PID looptime and gyro with higher frequency. Board load 12V BEC, the output current can reach 2A. It can supply power for graphic transmission, 12V LED lamp and other equipments. The SPI ICM-20602 which integrates accelerometer and gyro (with the running frequency can be set to 32KHz) is adopted. Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via the Betaflight software. (Note: the OSD is controlled by the F4 MCU.) The FC which supports Betaflight firmware & allows parameter adjustment via Betaflight software is more applicable to FPV race. F-card which can record and save more flight/black box data allows users to adjust thesetup of their aircraft easily. Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM and etc. LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC. Volt/Amp monitoring port allows users to check the battery voltage (BAT port) and current (CRT port , extra current meter is needed). Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing the flight status of the aircraft. Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters. \ Switch module of board load graphic transmission(VTX) can use remote contorl tocontrol switch of graphic transmission. Model Micro F4 Flight Controller F4 G3 + OSD SKU 31003001 Application FPVs with 130-300mm FPVs Diagonal Wheelbase Firmware OMNIBUSF4SD FC Programming supported Programming via Betaflight/Cleanflight-configurator and Others Compatible with (Modes) PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, DShot1200, Proshot1000 and etc Compatible with (Transmitters) PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL, and etc. OSD Buit-in Voltage Monitoring Supported Current Monitoring Supported External Buzzer Supported LED Control Supported USB Port MicroUSB Timing Supported Motor Rotation Supported size/ weight 36*36mm / 6g Download Manual Download
HobbyWing XRotor Flight Controller F4 G3 w/OSD
Generation 3
Flight Controller that works, period
Redesign every aspect
STM32 F405 MCU
allows the FC to run the PID looptime and gyro with higher frequency.
Board load 12V BEC,
the output current can reach 2A. It can supply power for graphic transmission, 12V LED lamp and other equipments.
The SPI ICM-20602 which integrates accelerometer and gyro (with the running frequency can be set to 32KHz) is adopted.
Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via the Betaflight software. (Note: the OSD is controlled by the F4 MCU.)
The FC which supports Betaflight firmware & allows parameter adjustment via Betaflight software is more applicable to FPV race.
F-card which can record and save more flight/black box data allows users to adjust thesetup of their aircraft easily.
Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM and etc.
LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC.
Volt/Amp monitoring port allows users to check the battery voltage (BAT port) and current (CRT port , extra current meter is needed).
Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing the flight status of the aircraft.
Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters. \
Switch module of board load graphic transmission(VTX) can use remote contorl to
control switch of graphic transmission.
Model
Micro
F4 Flight Controller F4 G3 + OSD
SKU
31003001
Application
FPVs with 130-300mm FPVs Diagonal Wheelbase
Firmware
OMNIBUSF4SD
FC Programming
supported
Programming via
Betaflight/Cleanflight-configurator and Others
Compatible with (Modes)
PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, DShot1200, Proshot1000 and etc
Compatible with (Transmitters)
PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL, and etc.
OSD
Buit-in
Voltage Monitoring
Supported
Current Monitoring
Supported
External Buzzer
Supported
LED Control
Supported
USB Port
MicroUSB
Timing
Supported
Motor Rotation
Supported
size/ weight
36*36mm / 6g
Download
Manual Download
×
×
×
×
×
Buy now and save!
Tell a friend
Visit store
Watch now
Postage info
Click the Postage tab above the listing description for more info
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
You might also like
Align Torque Tube - Trex 500E Pro / 500 ESP / 500 EFL / 500 Pro DFC / 500L Domin
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© HeliDirect
Postage
Click the Postage tab above the listing description for more info
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
eBay integration
by