-40%
Johnson Controls CD-2000 PSR Module Rev.3 0444 NEW works w/ Strand CD80 Dimmer
Johnson Controls CD-2000 PSR Module Rev.3 0444 NEW works w/ Strand CD80 Dimmer
Johnson Controls CD-2000 PSR Module Rev.3 0444 NEW works w/ Strand CD80 Dimmer
Johnson Controls CD-2000 PSR Module Rev.3 0444 NEW works w/ Strand CD80 Dimmer
Johnson Controls CD-2000 PSR Module Rev.3 0444 NEW works w/ Strand CD80 Dimmer
Johnson Controls CD-2000 PSR Module Rev.3 0444 NEW works w/ Strand CD80 Dimmer
Johnson Controls CD-2000 PSR Module Rev.3 0444 NEW works w/ Strand CD80 Dimmer
Johnson Controls CD-2000 PSR Module Rev.3 0444 NEW works w/ Strand CD80 Dimmer
Johnson Controls CD-2000 PSR Module Rev.3 0444 NEW works w/ Strand CD80 Dimmer
Johnson Controls CD-2000 PSR Module Rev.3 0444 NEW works w/ Strand CD80 Dimmer

Johnson Controls CD-2000 PSR Module Rev.3 0444 NEW works w/ Strand CD80 Dimmer

$ 102.96

Availability: 94 in stock
  • Condition: Open box
  • Number of Channels: na
  • Model: Johnson Systems CD-2000 PSR Module
  • MPN: CD-2000 PSR
  • Brand: Johnson Systems Inc
  • Type: PSR Module
  • All returns accepted: ReturnsNotAccepted

    Description

    Johnson Systems CD-2000 Power Supply & Ramp Module for sale.
    (See other listing for CD-2000 ECU Module)
    This is new unit in open box was purchased to upgrade old Strand CD80 System & never installed.
    CD-2000
    PSR Module
    System 2000 PSR
    Rev.3
    0444
    The ECU module shall be capable of memorizing a minimum of 18 presets with individual time fade for recall from Johnson Systems CS-2809 System Management Control (SMC) stations. These presets be DMX “snap-shots” available for instant playback in the event of control console failure. These presets shall be automatically locked out when the system control console is on to prevent accidental access. It shall be possible to “back up” all system configuration data. All such data shall be protected from power failure by EEROM for a minimum of 100 years.
    A time-of-day clock shall be incorporated into the ECU module electronics. Scheduled preset times shall be programmable to permit system automation through automatically scheduled preset events. The clock shall be protected from power failure by a lithium cell with minimum 10-year life.
    The ECU module shall accept up to 16 analog inputs (0-10 volt DC) with the ability to be assigned to any of the 128 dimmer outputs in the system (2048 possible assignments). The analog inputs shall function in a pile-on or HTP mode with the console control DMX signal.  Each individual dimmer in the dimmer cabinet shall be capable of being assigned one of four dimmer curves; incandescent square law, fluorescent, linear, or non-dim.