-40%
NewBeeDrone Infinity AIO V2 F7 BLHeli32 55A All In One Flight Controller
NewBeeDrone Infinity AIO V2 F7 BLHeli32 55A All In One Flight Controller

NewBeeDrone Infinity AIO V2 F7 BLHeli32 55A All In One Flight Controller

$ 66

Availability: 42 in stock
  • Type: Flight Controller
  • Brand: NewBeeDrone
  • Condition: New
  • Model: BLHeli32 55A

    Description

    OPENED PACKAGE. DECIDED TO GO A DIFFERENT ROUTE. OPENED BUT UNUSED, UNSOLDERED, BRAND NEW FLASHED TO BF4.3 RC7
    Information:
    NewBeeDrone
    Infinity AIO V2
    is the next generation of Infinity AIO Flight Controller.
    Any requests from the V1, we have them on the V2.
    Our first-generation board was fully covered in heatsink and the components were sealed completely to provide better reliability and durability. Improving upon that, our V2 version is even better on weatherproofing and packed in all the requested features such as OSD Chips and more Uart ports.
    The AIO is truly the next level solution for flight controllers and ESCs. Based on our data from the Infinity AIO V1, not only was the AIO solution more compact but there were also less issues compared to stacks.
    We have invested immense amount of R&D time to optimize the hardware between high current and signal processing layout to make the board extremely compact and with no interference. Additionally, by sealing every component inside the aluminum heatsink which acts like a shield to protect from dusts and other conditions, we maximize the physical toughness of the AIO stack.
    Specification:
    MCU: STM32F745VEH6
    Gyro: BMI270
    LED: 4x Betaflight Addressable LED’s
    Blackbox:1MB
    6-Pin DJI FPV Air Unit Connector
    Micro USB Connector
    UART1 - SBUS on DJI Connector (RX only)
    UART2 - DJI Connector
    UART3 - Free
    UART7 - Free
    UART8 - Free
    4x SMT32G071 BLHELI32 ESC MCU
    Continuedly Current 55A and 65A Burst ESC
    3-6S Battery Input
    10V 3A 30W Design for DJI FPV Air Unit
    5x37mm with 30.5x30.5 Mounting Holes
    Weight: 22gr. without grommets
    Betaflight OSD support Analog build
    I2C_SCL I2C_SDA Ready
    Buzzer Ready
    LED Ready
    5V 2A Power supply for external LED or GPS module
    Includes:
    1x Infinity AIO V2 Flight Controller + ESC
    1x Infinity AIO V2 to DJI Air Module Cable 100mm (Silicon wire)
    2x Infinity AIO V2 JST0.8 16Pin Cable 150mm (Teflon wire)
    13x Nylon Lock Nut
    5x Steel Screw M3x14
    4x Grommets Short 4x Grommets Long
    1x 470uf 35v Electrolytic Capacitor
    1x XT60 Cable
    Wire Diagram: