PowerBox Mercury SRS with BlueCom Bluetooth Internal iGyro GPS LCD Sensor Switch

Description

Please notice:
All shipping must be delay because of the virus. I can't Guarantee you can receive your order in a short time.
Please don't buy it if you don't accept this.
If you can't find your country in the shipping list. Please feel free to ask me about the shipping cost for your country.
Thanks for looking.
100% Brand New, never open the box and still with Factory Seal.
PowerBox Mercury SRS with Internal iGyro, GPS, LCD & Sensor Switch
PBX4110
Come with BlueCom Adapter Android
PBS9022
.
Very easy to do the setup with your Android cell phone.
Will ship to World Wide.
Features
Integral iGyro: Triple-axis gyro system with attitude assist function
Expanded setup assistant for ultra-simple operation
Special regulatory algorithm for fixed-wing model aircraft
Six independent gyro outputs for: 2x ailerons, 2x elevators, 2x rudders
Special thrust vector support
GPS-regulated gyro gain
Extremely accurate six-axis MEMS sensor
Integral Delta and V-tail mixer
Door sequencer: freely programmable outputs with set-up assistant
Servo-Match function: servo centre, end-points and reverse for all 15 servo outputs
SRS: Serial Receiver System provides the facility to use receivers with serial interface: Futaba S-Bus, Spektrum DSM2 und DSMX, Jeti UDI, Multiplex M-Link, HoTT and JR X-BUS
Unrestricted channel assignment for all 15 PowerBox outputs
Graphic OLED screen with 128 x 64 pixels
Extremely user-friendly menu-based programming using the SensorSwitch
15 channels
Signal amplification and interference suppression for all 15 outputs
Flight recorder, recording of lost frames and fail-safe events
Variable frame rate, range 12ms – 21ms
16-bit processors for fast, high-resolution signal processing
Double-regulated output voltages for receivers and servos
regulated output voltage 5.9V or 7.4V
Connection facilities for Futaba, Jeti, Spektrum, HoTT, JR and Multiplex MSB downlink bus systems
Direct transmission of the battery informations, receiver data and GPS data to the transmitter
Separate voltage display for each battery
Minimum value memory alerts the user to voltage collapses
Large-area heat-sinks for high regulator performance
Regulator monitoring, regulator error indicator
Support for three battery types: LiPo/LiIon, NiMh/NiCd, LiFePo
Suppression of any servo feedback currents which may occur
Updateable with PowerBox Systems USB Interface or BlueCom adapter
Technical Data
Operating voltage
4.0V - 9.0V
Power supply
2S LiPo/LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state
99mA (with OLED)
Current drain Standby
3µA
Maximum load current
Peak 2x20A
Drop-out voltage
0.3V
Output voltage
5.9V or 7.4V regulated
Signal input
serial
Supported RC systems
Jeti, Futaba, Spektrum, HoTT, M-Link, JR Propo
Receiver redundancy
SRS
Channels
15 (18)
Servo sockets
15
Programmable servo outputs
15
Servo signal resolution
0.5µs
Signal frame rate
12ms, 15ms, 18ms, 21ms
Integral gyro system
iGyro
Gyro regulation
Attitude assist and Normalmode
Gyro sensor type
MEMS
Number of sensor axes
6
Screen
OLED
Integral door sequencer
yes
Supported telemetry systems
Jeti, Futaba, Spektrum, HoTT, M-Link, JR Propo
Dimensions
93 x 67 x 19 mm
Weight
85g
Weight Sensor Switch
15g
Weight of LCD screen
15g
Temperature range
-30°C bis +75°C
The
BlueCom
™ adapter provides a means of setting up
PowerBox
products wirelessly, and of updating the software to the latest version. To use the adapter all you have to do is simply and conveniently download the corresponding App for your Mobilphone or tablet from Google Play or the Apple Appstore - at no charge! Once you have installed the App on your mobile telephone or tablet, you can plug the
BlueCom
™ adapter into a
PowerBox
device. You are then in a position to load the latest update or alter settings. For example, the
BlueCom
™ adapter enables you to adjust all the various settings available on the
PowerBox Pioneer
*,
iGyro 3xtra
*
and
iGyro 1e
*
conveniently from your mobile phone.
I also have many R/C turbine engines for selling.  Brand new or second hand.
Please check my others listing and visit my ebay stores often.  Thank you.
All items instock, can be ship out within 48 hours after got your order.
All items are fully TRACKED by Hong Kong Post
We are NOT responsible for any import tax, customs fees or customs delay.
Buyer cannot request to cancel the auction or request for refund under this situation.
Please check with your local tax authorities BEFORE bidding.
I know what you need because I'm a modeler too.
I'm not only selling,  I also play them.